How to maintain and maintain villa elevators

    The regular maintenance of villa elevators is once a month, and it requires maintenance professionals to inspect, repair, and replace the equipment parts during elevator operation through professional equipment to ensure the safe operation of the elevator; The routine maintenance cycle is usually two weeks, and the process is generally relatively simple. Maintenance professionals need to observe, inspect, and test the elevator equipment through their own senses.

Villa elevators should be regularly maintained

     Routine maintenance and upkeep of the villa elevator control screen is also necessary, and the correctness of its operation should be verified when the elevator traction machine is powered off. Use a soft brush or hair dryer to remove any accumulated dust from the printed circuit board, its connectors, and all electronic components. Check the status and contact condition of the electromagnetic switch contacts, the insulation of the coil surface, and the reliability of the mechanical interlocking action; The area where the contactor and relay contacts are burned should be treated with fine sandcloth and wiped clean. Check, verify, and adjust the contacts to ensure they have a certain gap, good contact, appropriate pressure, and appropriate action margin; When the traction motor is overloaded for a long time, the thermal relay may act and cut off the power supply of the traction motor. At this point, the thermal relay needs to be manually reset.

Maintenance of Villa Elevator Hall Doors and Car Doors

     The hall and car doors of villa elevators are prone to problems. What needs to be done is to add oil to the refueling area on the upper sill frame, maintain good lubrication, and the elevator will not make unpleasant noises during operation and when the door is opened. The frequency of opening and closing the villa elevator door is relatively high, and the opening and closing wires are prone to damage. This requires frequent inspection. If safety hazards are found, it is necessary to pay attention to replacing them as soon as possible.